Extremely compact structure
Its face-to-face length is much shorter than that of a conventional flanged ball valve.
FORGED VALVE RANGE
For projects specifying a forged valve body. Begin with the applicable standard, connection, pressure class, material grade and service conditions.
Prepare a product enquiry
The photographed valve is a JIS 20K sample marked 304 and 40A. The downloadable drawing is for a separate PN40, DN15–DN100 series. They are shown as two different references and must not be treated as one exact model.
For a quotation, identify the required standard and pressure system first, then confirm the matching model, drawing, dimensions and material designation.
PRODUCT DESCRIPTION
Thin-pattern ball valves (also known as wafer ball valves) have a short face-to-face length and are designed for piping systems with limited installation space, weight restrictions or narrow pipe spacing.
Its face-to-face length is much shorter than that of a conventional flanged ball valve.
Its compact size and low weight make installation easier in dense and complex piping systems.
It normally opens and closes with a 90-degree turn, provides low flow resistance and allows nearly unobstructed flow when fully open.
The simple construction makes disassembly and seal replacement convenient.
Thin-pattern ball valves are widely used in petroleum, chemical, metallurgy, pharmaceutical, paper, district heating and water treatment systems, especially in pipelines where installation space is limited.
For product selection, specify the required DIN/EN, ANSI/ASME or JIS standard. Connection dimensions, pressure ratings and conformity requirements are confirmed for the specific model and order.
One-page DN15–DN100 reference drawing. It is not the matching drawing for the photographed JIS 20K sample.
